Last Updated On April 1, 2023
Last week, my brother came with a new Skil saw and said the saw wasn’t working efficiently! Actually, beginners like him face lots of issues as they don’t know the adjustment and even break the lever due to the wrong move.
How to adjust Skil saw blade depth? Unplug the saw, loosen the depth adjusting lever, set the base according to the depth, tighten the lever to fix the position, plug the saw and your saw is ready for cutting.
Still, confused or want more clarification? Go through our detailed article to get more details. As we covered lots of related queries, we hope you will be able to adjust Skil saw blade depth in seconds even before going to the end!
How To Adjust Skil Saw Blade Depth?
To adjust the Skill saw blade depth, you have to maintain the following steps.
First of all, unplug the saw to avoid the risk of any sort of accident while adjusting the lever. As the saw may start while handling levers, it is a must to keep you safe. Next, lose the depth-adjusting lever so that you can move to the base. Due to the lever, the base or shoe of a Skil saw remains stable at a certain point. If you loosen it, the base or shoe will move freely.
Once you’re done with the lever adjustment, set the base according to the depth. Push the base downward to get a low depth. On the other hand, if you look for a high depth, you have to pull the base upward.
Then, tighten the lever at the depth setting you desired. As the base remains unstable after losing it, tightening is a must for further approach. Finally, you have to plug in the saw with the powered cord. Now, switch on the saw and enjoy the depth cuts as long as you want.
How To Adjust The Height Of A Circular Saw
A circular saw comes with a level mechanism that connects the base movement. Now, if you loosen the lever and set the base with the blade guard at a certain point, you will be able to adjust the height of a circular saw. Let’s have a look at the details.
When it comes to the height adjustment, you have to remove the battery or unplug the saw first. Next, look for the height-adjusting lever which is on the back. Push the lever to loosen it which helps you to get access to the base.
Once you get access, move the base upward or downward to adjust the desired depth according to the need. If you’re done with height adjusting, push the lever back to stabilize the base. After tightening the height, the adjustment is almost done. Finally, add the battery pack or power cord to start the cutting.
Adjusting The Skil Saw Blade Depth- Step By Step

For adjusting the skill saw depth, you have to go step by step- unplug the saw, loosen the lever, set the base or shoe, tighten the lever, and plug the saw.
-
Unplug The Saw
Before adjusting the Skil saw blade depth, unplug the saw or remove the battery to avoid the risk of any sort of accident. While working with a lever, the saw may start and cause serious injuries to the hands. So, it is a must to unplug the Skil saw from the power source.
-
Loosen The Lever
Once you detach the saw, look for the height-adjusting lever. Most of the saws include it on the back. Now, loosen this lever as it accesses the user to move the base. Due to the lever, the base or shoe of a Skil saw remains stable at a certain point. If you loosen it, the base or shoe will move freely.
-
Set The Base or Shoe
When you get access to the base, move the base upward or downward to adjust the desired depth. Push the base downward to get a low depth or pull the base upward for a high depth.
-
Tighten The Lever
Your job is 90% done. Now, push the lever back to stabilize the base and get the correct depth setting you desired. With the tightening of the lever, the saw blade’s depth is completely adjusted to a certain point. So, add the battery pack or power cord, switch it on, and safely operate the saw to enjoy a cleaner cut.
What Depth Should You Set a Circular Saw Blade
It depends on the thickness of the board. But, you should never go for a blade extend of more than 1/4 inch below the board thickness. It actually hampers the overall efficiency of circular or table saws a lot.
If you want to measure the circular saw the depth of cut, you can use either the blade or measuring tape. First of all, using the blade is quite fast and applicable to most tasks. Just place the blade alongside the material and extend it less than 1/4 inch below the workpiece to avoid excess friction.
On the other hand, if you’re working on precise jobs like cutting dadoes, and half-lap joints, use the tape to measure the depth. It is more accurate and offers precise cutting depth with a straight line or using a track system to cut straight.
Now, you have the right depth which you can extend a little to get an efficient cut. But, don’t extend the blade’s depth more than 1/4 inch below the workpiece thickness. As more depth can cause kickbacks and increase excess friction of circular saws, it is better to extend less.
Further, keep sure you unplug the power cord or remove the battery before starting the adjustment. If the blade remains connected, it may start while setting the blade depth and cause serious injuries.
Final Words From Gears Guider
Finally, we are at the final step of our detailed staircase. As we tried to cover all the information on the Skil saw blade depth adjustment, we hope you are clear about the process. Besides, we add some related queries that help you to adjust saw blade depth in seconds!
If you don’t adjust the Skil saw blade properly with the depth of the workpiece, it won’t be able to offer efficient and precise cuts. So, adjust the blade depth of your saw like a pro and enjoy efficient cuts for hours.

This is Ahmed Shuvo, an enthusiastic tool enthusiast with a passion for saws, especially circular saws and miter saws. I have written blog posts and conducted research on the proper use and maintenance of these tools. I am also a DIYer who enjoys making wooden projects and always striving to improve my skills. I am confident in my expertise and eager to contribute to the growth of this industry through my writing.