Best Circular Saw Blade For Laminate Flooring To Get Clean Cuts

Last Updated On February 10, 2023

Want wear and a tear-free cutting? Or Looking for a fast and smooth cutting blade for laminate flooring?

You are in the right place! In this article, we are here with some best circular saw blades which can offer fast and smooth cutting without having any wear and tear issues. 

When it comes to laminate flooring, saw blades cause chipping or kickbacks which can tear up the material. Besides, low-quality blades dull faster and create a dusty mess while cutting. 

Now, to get rid of such issues, use a high-quality circular saw blade which can stay sharper for a longer time, prevent chipping, and provide clean & efficient cuts. That’s why we have included the best circular saw blade for laminate flooring you can go right now!

Comparison Table

Table could not be displayed.

Best Circular Saw Blade For Laminate Flooring To Get Clean Cuts

High-quality blades can provide clean and efficient cuts without causing chipping or kickbacks. Let’s look at some best options for laminate flooring.

#1 Best Overall: Bosch DCB1072CD 10-inch Circular Saw Blade

No products found.

In the first compartment, we have a Bosch DCB1072CD Circular saw blade that comes with an upgraded Brute C3 or C4 micro-grain carbide formulation. As a result, this saw blade has higher impact damage resistance and stays sharper for a longer time. Let’s look at the best specs of this saw blade that might help you to make a quicker decision.

Key Features

• Upgraded C3/C4 micro-grain formulation
• Triple chip grind tooth geometry design
• Includes speed Coat anti-friction finish
• Comes with an extra-hard steel blade body
• Special negative hook angle with thinner kerf.

First, we are talking about the design of the saw blade. As the blade comes with a triple chip grind tooth geometry design, it can deliver extreme performance to provide fast and smooth cuts. In fact, the tooth geometry can offer high-quality finishing even in highly abrasive material.

On top of that, the extra-hard steel circular blade can deliver accuracy to make the job done in seconds. Besides, this circular saw blade includes a speed Coat anti-friction finish. With such premium-quality finishing, this blade cuts faster and resists bending and deflection for a true cut.

However, this Bosch DCB1072CD saw blade comes with a special negative hook angle. Now, as the angle eliminates chipping, it helps to extend the blade life. Further, the thinner kerf can cut quicker with less waste. That’s why you can use the blade for cutting expensive materials. So, overall, it is the best 10-inch saw blade for laminate flooring.

Pros

• Thinner blade kerf can cut quicker with less waste
• Deliver extreme performance to provide fast and smooth cuts
• Offer high-quality finishing even in a highly abrasive material
• Anti-friction finish resists bending and deflection for a true cut
• C3/C4 micrograin formulation has higher impact damage resistance.

Cons

• This saw blade may dull faster
• It is a little bit noisy while working.

#2 Best Material: WEN BL0704 7-1/4-Inch Professional Circular Saw Blade

No products found.

We have an ultra-thin BL0704 circular saw blade on the second spot developed by the well-known WEN family. As the saw blade is designed with 4 polycrystalline diamond-tipped teeth, it can provide fast and smooth cuts while working with fiber cement and laminate. Let’s have a look at the specification of this saw blade.

Key Features

• 4 polycrystalline diamond-tipped teeth
• Include built-in heat expansion slots
• Ultra-thin 1/15-inch kerf for clean cuts
• Comes with a lightweight and thin blade design
• 5/8 in arbor compatible with the 7-1/4 in circular saws.

Often you heard about the saw blade wear or tearing the materials you’re cutting. It happens as the blade comes with a thicker kerf. But, as this WEN circular saw blade includes an ultra-thin 1/15 inch kerf, it can provide clean cuts and prevent wear and tear. Besides, this thin kerf blade produces less waste, making it ideal to work with expensive materials.

Compared to the Bosch DCB1072CD 10-inch Circular Saw Blade, this one includes built-in heat expansion slots. Due to such quality build-up, this blade can expand and contract as the heat builds up. As a result, it can maintain top-notch accuracy in various cutting conditions.

Moreover, the arbor of the saw blade is 5/8 inch which is compatible with different types of 7-1/4 inch saws. So, whether you want a blade for a circular saw, job site, or track saws, this WEN BL0704 is always standing by your side.

Pros

• Thin blade kerf provides clean cuts and prevent wear and tear
• Compatible with 7-1/4 inch circular, job site, or track saws
• Diamond tipped teeth can offer fast and smooth cuts
• Produce less waste, ideal to work with expensive materials
• Maintains the blade’s shape and edge sharpness for a longer time.

Cons

• Not ideal for going through ferrous metal
• Need extra care as it doesn’t have a good coating.

#3 Best Budget: RIDONG 6-1/2 Inch ATB Framing Circular Saw Blade

No products found.

On the 3rd compartment, we have a RIDONG ATB Framing Circular Saw blade that comes with Hi-density micrograin carbide teeth. With such high-grade build-up, this circular saw blade provides clean cuts, improves cut quality, and stays sharper. To know what this saw blade brings, let’s scroll through its specs. 

Specification

• Hi-density micrograin carbide teeth
• Comes with laser cut expansion slots for accuracy
• Reinforced shoulder for impact resistance
• The non-stick coating protects against heat and corrosion
• Includes laser-cut stabilizer slot to reduce noise and vibration.

This ATB Framing Circular Saw blade comes with a non-stick coating. Now, as the coating protects the carbide-tipped blade against heat and corrosion, the blade remains in shape and sharp for a longer time. In fact, this saw blade for cutting laminate includes a reinforced shoulder that makes the blade impact resistance even against nail-embedded woods.

Same as the WEN BL0704 7-1/4-Inch Professional Circular Saw Blade, this one also includes heat expansion slots. As these slots expand due to the heat, they can maintain top-notch accuracy and keep the cut true and straight. Besides, the thin kerf design prevents wear and tear, making the blade ideal for corded and cordless saws.

Further, this RIDONG circular saw blade comes with laser-cut stabilizer slots. As these slots can trap noise and vibration, it helps to stabilize the blade while working. Hence, the laminate floor saw blade can produce quiet, smooth, and cleaner cuts. 

Pros

• Carbide teeth provide clean cuts and improve cut quality
• Reinforced shoulder makes the blade impact resistance
• Maintain top-notch accuracy and keep the cut true and straight
• Non-stick coating keeps the blade in shape and sharp for a longer time
• Laser-cut slots stabilize the blade and produce smooth and cleaner cuts.

Cons

• The cuts may be a little bit messy
• This saw blade may dull faster.

#4 Best For Clean Cuts: Carbide-Tipped Circular Saw Blade

No products found.

Next, we have a Carbide-Tipped Circular Saw Blade that is made with durable premium alloy steel material. As a result, this saw blade offers superior strength and hardness against heavy materials and enhanced corrosion resistance. Let’s look at the best specs of this circular saw blade.

Specifications

• Include tungsten carbide teeth
• Made with premium alloy steel material
• Thin kerf for clean and smooth cuts
• Comes with a laser-cut with solid steel cores
• A lower hood angle improves the cut quality.

When it comes to the build-up, this circular saw blade includes a solid steel core. Now, as the steel core can fit perfectly on the saw’s arbor, it can go up to 5095 rpm. Besides, this blade is laser cut from solid metal which can ensure extreme durability than traditional ones. 

Pretty much like the previous RIDONG 6-1/2 Inch ATB Framing Circular Saw Blade, this one also includes military-grade carbide teeth. As a result, this saw blade has higher impact damage resistance and stays sharper for a longer time.

However, the thin kerf of this saw blade can cut laminate flooring quicker with less waste. In fact, you can get a smooth finish and the thin kerf is suitable for cutting expensive materials. 

Also, this circular saw blade comes with a lower hood angle. As the design helps to increase the feed pressure, this blade improves the surface quality of the cut. So, this is the best circular saw blade for laminate flooring.

Pros

• Tungsten carbide teeth stay sharper for a longer time
• Alloy steel material offers superior strength and hardness
• Laser-cut from solid metal which can ensure extreme durability
• Lower hood angle improves the surface quality of the cuts
• Thin kerf blades can cut laminate flooring quicker with less waste.

Cons

• The blade longevity is a little shorter
• It is a little bit noisy while cutting hardened things.

#5 Best Pack: 3Pack 60-Grit Diamond Compact Circular Saw Blade

No products found.

Finally, we have a pack of 60-Grit Diamond Compact Circular Saw Blades made with heat-treated manganese steel. Due to such high-quality material build-up, these blades become durable and last longer. Let’s have a look at the specification of this saw blade pack.

Specifications

• Compatible for max 13,000 RPM
• Includes 3 compact circular saw blades
• Made with heat-treated manganese steel
• Comes with 60-Grit diamond teeth
• Advanced segmented design improves airflow.

In this pack, you’re getting 3 premium-quality diamond grit blades that provide triple cutting life than other blades. Besides, these premium blades can go up to 13,000 RPM, making them ideal for stone tile, cement, roof tiles, and so on.

Whereas the Carbide-Tipped Circular Saw Blade comes with carbide teeth, this one includes 60-Grit diamond teeth that offer clean cuts and improve cut quality. In short, these diamond grit stays sharper and provides a long cutting life. 

Further, this saw blade pack comes with a segmented design. As the design improves airflow, these segments help to dissipate heat and remove cutting dust. As a result, these blades provide smooth and clean cuts. So, if you’re looking for a pack with maximum cutting performance, this pack includes the best blade for laminate flooring.

Pros

• This pack provides triple cutting life than other blades
• 60-Grit diamond teeth offer clean cuts and improve cut quality
• Heat-treated manganese steel makes blades durable and long-lasting
• Go up to 13,000 RPM, ideal for stone tile, cement, roof tiles, and so on
• Segmented designs dissipate heat to keep blades cool and remove cutting dust.

Cons

• These blades cut the material a little bit slowly
• A little bit of extra care is needed for a longer cutting life.

Tips For Using a Circular Saw To Cut Laminate Flooring

Take a laminate flooring board and go through it! Actually, it’s not like that as you may face chipping and kickbacks. Let’s scroll through some tips you can use to get clean and efficient cuts.

First, always use a high-quality saw. As normal saws cause kickback while cutting thinner materials, using a quality saw is a must for clean cuts. Next, start the saw to cut the pieces from the backside. If you set the circular saw properly, you won’t face issues like chipping or kickbacks.

After that, measure the required space and mark them on the board with a pencil. It is better to leave a 1/4 inch space while measuring as it helps you while installing the laminate flooring board. 

Finally, you can use rubber spacers between the laminate flooring boards before installing. Once the installation is complete, you can remove these spacers.

How To Cut Laminate Flooring With a Circular Saw

To cut laminate flooring with a circular saw, you have to go step by step.

Let’s talk about the tools and setup first. To get straight and clean-cut, you have to measure the required space. If you want a correct measurement, use a measuring tape and leave a 1/4 inch space as an extension gap. As the gap helps to get a quick and fast flooring, don’t forget the gap. 

Once you’re done with the measurement, use a quality saw for clean cuts. Now, set the flooring board properly and start the saw to cut the pieces. It is better to cut the pieces from the backside as it prevents issues like chipping or kickbacks.

Then, check the piece whether it fits or not. If not, trim the board pieces and try again. Finally, use rubber spacers between the laminate flooring boards for a perfect fitting. 

How To Cut Laminate Flooring Without Chipping?

Chipping is an improper type of installation that happens if you separate the board incorrectly. Also, using a dull blade can cause chipping. To complete the laminate flooring project without chipping, you have to follow some steps.

First of all, mark and measure the board and mark the space with a pencil. Next, use a stand or clamp to set the flooring board properly. Then, take a sharp circular saw to avoid chipping.

After that, wear safety gear like goggles, hand gloves, and a mask. Now, start the saw to cut the pieces from the backside. If you set the best saw blade on the backside of the board, you won’t face issues like chipping. 

But, a circular saw can still cause chipping while cutting angles. So, it is better to use the best jigsaw blade for cutting the angles of the laminate flooring board. 

What To Look For In The Best Laminate Flooring Circular Saw Blade

Before spending some bucks on a circular saw blade for laminate flooring, you have to be clear about multiple factors like materials, teeth, saw compatibility, arbor size, blade diameter, and kerf. Let’s dig into these factors in detail.

Teeth

The teeth of the blade are the most important factor you need to look at first. If the teeth build-up materials are not high-grade, they won’t be able to offer sharp and clean cuts. In fact, the durability or sharpness completely depends on the blade teeth.

Most of the circular saw blade teeth come with a 60-Grit diamond material or Brute C3 or C4 micrograin carbide formulation. Now, the C3 or C4 carbide formulation has higher impact damage resistance and stays sharper for a longer time. 

On the other hand, 60-Grit diamond teeth blade ensure clean cuts that help to improve cut quality. These diamond grit teeth also stay sharper till your project ends. So, choose a blade with high-grade teeth to get longer cutting life with clean cuts.

Blade Materials

It decides the durability and quality of cuts. If you’re looking for a blade that can stand against no matter how hard the material is, pick a blade that is made of high-grade carbide, heat-treated manganese steel, or premium alloy steel.

Now, as these materials are strong and lightweight, circular saw blades become durable and last longer than traditional ones. In fact, some blades include heat expansion slots that can expand while the saw is running at extreme speed to prevent wear and tear and offer clean cuts.

Blade Diameter & Kerf

The diameter of the blade is also important as it measures the depth of your cuts. If the circular saw is 10 inches but you use 9 ½ inch blades, the cutting depth will be minimal. So, using the right size blade is a must to get the desired cutting depth.

On the other hand, the thin kerf prevents issues like wear or tear. Some of the saw blades come with ultra-thin kerf, which can provide clean cuts and prevent wear and tear. Also, a thin kerf blade produces less waste while cutting. As a result, these circular saw blades are ideal to work with expensive materials.

Arbor Hole & Saw Compatibility

The blade middle hole is known as the arbor hole which decides whether the blade is compatible with the saw arbor or not! If the arbor hole size is not matched with the saw, the saw won’t be able to hold the blade while cutting.

In fact, different blade arbor hole sizes are compatible with different saws. Suppose, if the arbor of the saw blade is 5/8 inch, it is compatible with different types of 7-1/4 inch saws. So, pick the right size to work safely and get precise cuts all day long.

Frequently Asked Questions 

Do I need a special blade to cut laminate?

No, any blade you use in woodcutting is ideal to cut laminate. But, it is better to use blades with the maximum number of teeth.

How do you cut a quick step floor?

To cut a quick step, make a small cut first. Then, keep the saw line as close as possible to the surface.

Which Saw Should I Use For Cutting Laminate Flooring?

A Circular saw or jigsaw is the best for cutting laminate flooring. As circular saw offer higher rpm, they are ideal for such materials.

Do you cut the laminate flooring face up or down?

Cut laminate flooring with the good side facing up to keep the splinting out of the sight.

What length do you cut laminate flooring?

Cut laminate flooring more than 16 inches. Only if the floor is stable, then you can cut 12 inches.

Warp Up

Finally, we have made it to the end. Among these saw blades, the Bosch DCB1072CD 10-inch Circular Saw Blade comes with an upgraded Brute C3 or C4 micro-grain carbide formulation that makes blade damage resistant and helps to stay sharper for a longer time.

If you’re looking for a premium-quality diamond grit blade pack for laminate flooring, we suggest you go for 3Pack 60-Grit Diamond Compact Circular Saw Blade. Pick any of these blades right now or use our guide to get the best one. Choose your circular saw blade today to get clean and efficient cuts!