How to Cut A 60 Degree Angle with A Circular Saw?

Last Updated On May 7, 2023

The circular saw is well known for its variable cutting ability. It has a blade mounted on it which can be angled to cut in any direction. You can set the blade angle for several cuts other than 90 degrees. 

So, how to cut a 60-degree angle with a circular saw? Make two cuts on the board. Tilt the blade at 45 degrees for the first cut and 15 degrees for the second cut. 

However, you always need to be careful while working with a circular saw. Continue reading to know more.

Tools You’ll Need for This Project Are:

• Blades for circular saws
• Square route
• Clamp
• A pencil

If you want to do something more complicated, you may need to use a compass or a tool for cutting circles.

How to Cut A 60 Degree Angle with A Circular Saw

A circular saw can help you cut straight and accurately because it’s easy to set its blade on the wood you want to cut. Follow these steps to make a 60-degree angle with a circular saw: 

Step 1: Mark the Angle

Firstly, you need to know the angle of the cut. Mark the angle on the board.

Step 2: Adjust the Blade

Now, adjust the angle on the circular saw. Set the blade to 45 degrees. Then cut.

Step 3: Make a 15-degree cut

Adjust the blade to 15 degrees and make another cut. 

Step 4: Cut It Out

Now, you can remove wood from both sides to get a 60-degree angle. 

Step 5: Sand It

Sand it after cutting the angle using fine-grain sandpaper.

See the video below for a better understanding

Protection and Safety Measure

When you are working with a circular saw, follow some safety measures to protect yourself from getting hurt:

• Always wear goggles while operating the circular saw
• Wear long-sleeved shirts to cover your sleeves and hands
• Always protect your fingers and hands from getting hurt or damaged by a circular saw by wearing gloves
• Make sure you’re in a waterproof area and don’t step on any sparks that may occur during the cutting
• Unplug the circular saw when not in use
• Always wear ear protection when operating a circular saw to protect your ears from loud noise
• While working with a circular saw, make sure you’ve clean hands. This will help you avoid slipping and dropping your tools while working.

FAQs

1. How much freedom do you have when cutting at an angle with a circular saw?

If you’re using the saw’s miter guide, then you’ll get the precise result and the freedom to work according to your needs.

2. How do I make an angled cut with a circular saw?

Use the circular saw’s miter guide for cutting an angle. 

3. Can you miter with a circular saw?

Yes, you can cut a miter cut with a circular saw. 

Final Verdict

A circular saw can help you cut accurately and straight because it’s easy to set its blade on the wood you want to cut. You just need to put the wood on the table and set the blade in the right position to get a 60-degree angle.

Thanks for reading this post. Share it with your friends to encourage them to learn how to cut a 60-degree angle with a circular saw. Don’t forget to comment below if you’ve any doubts or questions about the steps mentioned here.