Last Updated On May 12, 2023
- When To Use A Circular Saw To Cut Brick?
- What You Need to Cut Brick With A Circular Saw
- What Type Of Blade Is Suitable for Cutting Brick With A Circular Saw
- How To Cut Bricks With A Circular Saw: Step-By-Step Guide
- Video On How To Cut Bricks With A Circular Saw
- Tips to Remember While Working With A Circular Saw
You may need to cut a brick that is installed in a place where it’s hard to reach with a masonry saw. In that case, a circular saw can be a handy tool. But how to cut bricks with a circular saw?
The key to successfully cutting brick perfectly is picking the right blade. However, the cutting process is generally really simple but can take a long time. Just set the blade, mark the brick, and then cut it following the outline.
You’ll need the ideal blade and other necessary tools for cutting brick. So, read on.
When To Use A Circular Saw To Cut Brick?
A masonry saw is the most used tool for cutting brick. But if you don’t have this particular tool, you can opt for a versatile circular saw. However, the task can be more challenging to complete with a circular saw than with a masonry saw.
Again, you may need a circular saw beside the dedicated machine when the brick pavers are installed in an intricate way that a masonry saw can’t cut them. In that case, a circular saw will come handy for you.
What You Need to Cut Brick With A Circular Saw
You only need a few tools for cutting pavers with circular saw. Here are they:
- Circular saw
- A new set of Diamond blade
- Alinger or scale
- Measurement tape
What Type Of Blade Is Suitable for Cutting Brick With A Circular Saw
Before proceeding with the detailed step-by-step process, you need to know the right blade and settings. Not all the available circular saw blades in the market will be the right fit for cutting bricks with this machine.
Hence, you need to ensure you have the right blade to make the task easier. A diamond masonry blade circular saw is the right blade for the task. Change the blade and set the blade depth to 0.25 inches. Be careful before turning the machine on after changing the blade.
How To Cut Bricks With A Circular Saw: Step-By-Step Guide
Once you have the necessary tools, like a good quality circular saw machine, the best circular saw blade for cutting pavers, and your safety gear, you can move on to the cutting process. Here is the step-by-step process:
Step 1: Prepare Yourself For The Task
Working with a circular saw will require you to protect yourself. The blade of the saw is too sharp, and if the blade isn’t installed properly, it can cause a horrible accident.
Wear a pair of heavy gloves and thick shoes to protect your hand and legs from getting injured by the blade. Also, don’t forget to put on your goggles and a dust mask to protect your entire face from brick flyaways.
Step 2: Set The Blade
After you prepare yourself, prepare the circular saw machine for the cut. Grab the diamond masonry blade for a circular saw and swap it with the previous blade.
It’s really important that you use a good quality blade to make the cutting results refined and precise. Generally, diamond blades come with tiny particles of diamonds coated in the edges, which makes them glide easily through heavy-duty materials like stone and brick.
If possible, opt for diamond blades that are specially made for cutting bricks.
Step 3: Mark The Outline
Now, it’s time to create the cutting outline over the brick. Even if the brick needs to be cut straight, consider marking it for the most accurate and precise results. Get your chalk and scale, measure the brick, and mark.
Step 4: Cut
Once the blade is set correctly, and the outline is complete, plug the machine into the power source. If the brick hasn’t been used yet, then you can simply cut it over the cutting table.
In case you’re working in a yard where the brick is already installed, consider sitting over a stool to be close to the cutting piece for better vision. However, make sure you arrange a long cord for the power source for yard projects.
Also, keep the blade speed low when you first turn the machine on and increase the speed gradually. Lastly, cut the brick slowly, following the outline.
Video On How To Cut Bricks With A Circular Saw
Still, confused about how to go through the process? Check this video to watch the step-by-step process of cutting a piece of brick with a circular saw.
Tips to Remember While Working With A Circular Saw
Saw blades will overheat due to continuous friction. In that case, you’ll have to stop working for a while or until the blade cools down again. If you don’t have much time, you can pour water gradually over the brick while cutting to keep the blade cool.
Of course, electricity and water can’t come in contact with each other. Hence, you’ll need an assistant to follow this trick. Make sure your assistant also wears safety gear while working with you.
Be extremely cautious while pouring water in front of the blade and pour close to the blade. It’ll help the blade remain cool throughout the process and dampen flyaways and dust.
1. What is the best tool to cut brick?
The best way to cut brick is using a diamond blade with 24 teeth. This blade is sharp enough to glide through dense and stiff materials, which makes them a good pick for cutting brick.
2. What is the easiest way to cut bricks?
The easiest way to cut bricks is using a masonry saw machine. You can also use a chisel and hammer to divide bricks easily. However, if the brick is installed in an intricate place, consider using a circular blade to cut it easily.
3. Can you put a masonry blade on a circular saw?
Yes, you can put a masonry blade on a circular blade to cut bricks. However, it may create lots of dust in your work area.
You just learned the step-by-step process of how to cut bricks with a circular saw and which blade you should pick for the task. Without the right blade and adjustment, cutting the brick with a precise result will be tricky.
Hence, you should ensure the right blade. Moreover, make sure you wear proper safety equipment to keep yourself safe while working with a circular saw.
This is Ahmed Shuvo, an enthusiastic tool enthusiast with a passion for saws, especially circular saws and miter saws. I have written blog posts and conducted research on the proper use and maintenance of these tools. I am also a DIYer who enjoys making wooden projects and always striving to improve my skills. I am confident in my expertise and eager to contribute to the growth of this industry through my writing.