How to Put the Blade on the Dewalt Circular Saw?

Last Updated On July 19, 2023

To put the blade on the Dewalt circular saw: loosen the blade bolt, remove the blade guard, place the blade on the spindle with the teeth facing forward, and tighten the blade bolt securely. When it comes to using a Dewalt circular saw, one essential task is knowing how to properly install the blade.

Whether you’re a professional or a DIY enthusiast, understanding this process ensures safe and efficient cutting. In this article, we will explain step by step how to put the blade on your Dewalt circular saw. By following these instructions, you can confidently attach the blade and start making precise cuts in no time.

So, let’s get started and learn the correct way to install the blade on your Dewalt circular saw.

How to Put the Blade on the Dewalt Circular Saw


Introduction To Dewalt Circular Saw Blades

The Dewalt circular saw is a powerful tool that can make your cutting tasks a breeze. But in order to achieve accurate and efficient cuts, it’s important to use the right blade. In this section, we’ll provide an overview of the Dewalt circular saw and discuss the importance of selecting the correct blade.

We’ll also explore the different components of the saw and how to ensure the blade is properly installed.

Overview Of The Dewalt Circular Saw

  • The Dewalt circular saw is a versatile tool that is used for cutting various materials, including wood, metal, and plastics.
  • It is designed with a circular blade that rotates at high speed, enabling smooth and precise cuts.
  • The saw is equipped with a powerful motor that provides the necessary cutting force and ensures clean, professional-looking results.
  • Dewalt offers a range of circular saw models to cater to different cutting needs and preferences.

Importance Of The Right Blade

  • Using the appropriate blade for your specific cutting task is crucial to achieve optimal results.
  • The right blade ensures cleaner cuts, reduces splintering and tear-out, and prolongs the life of both the blade and the saw.
  • Different types of blades are designed to cut different materials, such as wood, metal, or masonry.
  • Choosing the wrong blade can result in inefficiency, safety hazards, and may damage both the saw and the material being cut.

Understanding The Components

  • Before installing a blade on your dewalt circular saw, it’s important to understand its different components.
  • The blade itself is the primary cutting component, typically made of high-speed steel or carbide-tipped for durability and precision.
  • The blade guard is a protective cover that shields the user from the spinning blade and should always be in place during operation.
  • The arbor is the shaft on which the blade is mounted, and it is essential to ensure the blade is secured tightly to prevent accidents.
  • Lastly, the blade wrench is a tool provided with the saw to loosen and tighten the arbor nut for blade changes.

With a good understanding of the dewalt circular saw and its components, you’re ready to learn how to properly install a blade. This will ensure you’re equipped with the knowledge and skills to make the most out of your cutting tasks.

So, let’s dive in and discover how simple and straightforward it is to put the blade on your Dewalt circular saw.

Safety Precautions For Blade Replacement

Proper Safety Gear And Equipment

Before you start the process of putting the blade on your Dewalt circular saw, it is essential to prioritize safety. Here are some important safety precautions to keep in mind:

  • Always wear the appropriate safety gear, including safety glasses, ear protection, and work gloves. This will help protect your eyes, ears, and hands from any potential injuries during the blade replacement process.
  • Make sure you are working in a well-ventilated area, as cutting through materials can produce dust and debris. If necessary, wear a dust mask to prevent inhalation of harmful particles.
  • Ensure that you have a stable work surface and sturdy support for the circular saw. This will help minimize the risk of accidents or the saw slipping during the blade replacement.

Switching Off And Unplugging The Saw

Now that you have your safety gear on, it’s time to switch off and unplug the saw before proceeding with the blade replacement. Follow these steps:

  • Locate the power switch on the saw and turn it off. Double-check to ensure the switch is in the “off” position.
  • Unplug the saw from the power source by removing the power cord from the outlet. This step is crucial to prevent any accidental start-ups while replacing the blade.

Securing The Saw And Blade

Once the saw is switched off and unplugged, it’s important to secure it properly to prevent any mishaps during the blade replacement process. Here’s what you need to do:

  • Lock the saw’s blade guard in the raised position to expose the blade fully. This will give you easy access to the blade for replacement.
  • Use a wrench or the tool provided by dewalt to secure the arbor nut. Rotate the nut clockwise until it is firmly tightened to secure the blade in place.
  • Give the blade a gentle tug to ensure it is properly secured. If it feels loose or wobbly, double-check the arbor nut and tighten it if necessary.

By following these safety precautions, you can minimize the risk of accidents or injuries while putting the blade on your dewalt circular saw. Remember, safety should always be your top priority when working with power tools. Stay focused and take your time to complete the blade replacement process safely.

Happy sawing!

Step-By-Step Guide To Putting The Blade On The Dewalt Circular Saw

Replacing the blade on your Dewalt circular saw may seem like a daunting task, but with the right know-how, it can be a breeze. Follow this step-by-step guide to ensure you properly put the blade on your Dewalt circular saw.

Identifying The Correct Blade For Your Needs

Before you start the process of putting the blade on your Dewalt circular saw, it’s essential to identify the correct blade that suits your cutting needs. Dewalt provides a wide range of blades designed to cut various materials such as wood, metal, and plastic.

Consider the type and thickness of the material you’ll be cutting to choose the appropriate blade.

Removing The Old Blade

To begin the replacement process, you’ll need to remove the old blade from your Dewalt circular saw. Follow these steps to safely remove the old blade:

  • Unplug the saw or remove the battery if it’s cordless, ensuring it is completely disconnected from the power source.
  • Locate the spindle lock button on the side of the saw near the blade.
  • Depress the spindle lock button to lock the blade in place.
  • Using the blade wrench provided with your saw, place the wrench on the arbor nut in the center of the blade.
  • Turn the wrench counterclockwise to loosen and remove the arbor nut.
  • Carefully slide the old blade off the arbor, keeping your fingers away from the sharp edges.

Aligning And Inserting The New Blade

Now that you’ve successfully removed the old blade, it’s time to align and insert the new blade into your Dewalt circular saw. Follow these steps:

  • Ensure the new blade is the correct size and type for your saw and cutting needs.
  • Align the blade with the arbor, ensuring the teeth face in the direction of rotation indicated on the saw.
  • Slide the blade onto the arbor, making sure it is fully seated and flush against the saw’s blade housing.
  • Rotate the blade manually to check for any obstructions and verify its proper placement.

Securing And Tightening The Blade

After inserting the new blade, it’s crucial to securely tighten it before operating your Dewalt circular saw. Follow these steps to ensure the blade is properly secured:

  • Place the blade wrench back onto the arbor nut.
  • Tighten the arbor nut clockwise while holding the spindle lock button to prevent the blade from spinning.
  • Ensure the arbor nut is tightened securely, but avoid over-tightening, as this can cause damage to the saw.

Testing The Blade Tension

Before putting your Dewalt circular saw to use, it’s important to test the blade tension to ensure optimal cutting performance. Follow these steps:

  • Reconnect the power source or insert the battery if it was removed.
  • Turn on the saw and let it run for a few seconds, ensuring the blade operates smoothly and without any unusual vibrations.
  • Carefully inspect the blade for any signs of wobbling or misalignment.
  • If necessary, repeat the securing and tightening process to adjust the blade tension until it runs smoothly.

By following these step-by-step instructions, you can confidently put the blade on your Dewalt circular saw, allowing you to tackle your cutting tasks with precision and efficiency. Remember to prioritize safety throughout the process and always refer to the manufacturer’s instructions for your specific saw model.

Troubleshooting And Tips For Installing The Blade

Installing the blade on your Dewalt circular saw is an essential step to ensure efficient and safe cutting. However, it’s not uncommon to encounter some problems during the process. Don’t worry, though – we’ve got you covered! In this section, we’ll discuss common blade installation problems, how to troubleshoot them, and provide some handy tips for smooth blade replacement.

Whether you’re a DIY enthusiast or a professional carpenter, these insights will help you overcome any obstacles and maintain your saw in optimal condition.

Common Blade Installation Problems

Installing a circular saw blade may seem straightforward, but several issues can arise. Here are some common problems you may encounter:

  • Blade not fitting correctly: If the blade doesn’t align properly or fit tightly onto the saw arbor, it can lead to wobbling or even accidents during operation.
  • Blade getting stuck: Sometimes, blades can become stuck or refuse to spin freely due to improper installation, resulting in inefficient cutting performance.
  • Difficulty in tightening the blade: Tightening the nut or bolt that secures the blade can be challenging, especially if it becomes loose or gets stuck.

How To Troubleshoot

When facing problems with blade installation, it’s important to troubleshoot the issue promptly. Here are some steps to follow:

  • Check the blade size and arbor compatibility: Ensure that you have the correct blade size and that it is compatible with your Dewalt circular saw’s arbor.
  • Inspect the blade for damage: Examine the blade for any signs of wear, warping, or missing teeth that may affect its performance.
  • Clean the arbor and blade flange: Remove any debris, sawdust, or rust from the arbor and blade flange before installing a new blade.
  • Tighten the blade securely: Use the appropriate tool, such as a wrench or blade changing key, to ensure the blade is tightly secured to the arbor.

Tips For Smooth Blade Replacement

To ensure a hassle-free blade replacement process, consider the following tips:

  • Choose the right blade for the job: Different blades are designed for various materials and applications. Select a blade that matches your cutting needs to achieve optimal results.
  • Use a blade-changing tool: Invest in a suitable blade-changing tool, such as a key or wrench provided by the manufacturer, to facilitate easy and secure blade installation.
  • Follow the manufacturer’s guidelines: Always refer to the saw’s user manual for specific instructions on how to install and change the blade correctly.
  • Regularly inspect the blade: Periodically check the blade for any signs of wear or damage. Replace it if necessary to maintain cutting efficiency and reduce the risk of accidents.

Maintaining The Saw And Blade For Optimal Performance

To keep your Dewalt circular saw in top condition, consider the following maintenance tips:

  • Keep the saw clean: After each use, remove any debris or sawdust from the saw, especially around the blade and the motor vents.
  • Lubricate moving parts: Apply a small amount of lubricating oil to the blade arbor and other moving parts as recommended by the manufacturer to ensure smooth operation.
  • Store the saw properly: When not in use, store your circular saw in a dry and secure location to prevent moisture damage and unauthorized access.
  • Replace worn-out parts: Regularly inspect and replace worn-out parts, such as the blade, brushes, or cords, to maintain optimal performance and safety.

By troubleshooting common installation problems, following these tips, and properly maintaining your Dewalt circular saw and blade, you’ll ensure efficient and safe cutting operations for years to come. Happy cutting!

Frequently Asked Questions

  • How Do You Change The Blade On A Dewalt Circular Saw?

    1. Unplug the saw and ensure the blade guard is closed. 2. Use the spindle lock button to hold the arbor in place. 3. Use a wrench to loosen the arbor nut, then remove the old blade. 4. Place the new blade onto the arbor, ensuring it’s properly aligned. 5. Tighten the arbor nut securely. 6. Finally, release the spindle lock button and verify that the blade rotates smoothly.

  • Can Any Blade Be Used On A Dewalt Circular Saw?

    Not just any blade can be used on a Dewalt circular saw. It’s important to use the correct blade for your specific model.

  • How Often Should I Replace The Blade On My Dewalt Circular Saw?

    The frequency of blade replacement depends on a few factors, such as frequency of use, material being cut, and blade quality. As a general guideline, if you notice the blade becoming dull or if it starts producing rough cuts, it’s time to replace it.


To conclude, properly installing a blade on your Dewalt circular saw is essential for efficient and safe operation. By following the step-by-step guide outlined in this blog post, you can easily and quickly put the blade on your saw without any hassle.

Remember to prioritize safety by disconnecting the power source and wearing protective gear throughout the process. Taking your time and carefully aligning the blade with the arbor will ensure a secure fit. Once the blade is securely in place, tighten the bolt or nut firmly but do not overtighten.

Regularly inspect the blade for any signs of wear or damage and replace it as needed to maintain optimal performance. With the knowledge and techniques shared here, you can confidently tackle any project with your Dewalt circular saw. Happy sawing!

Leave a Reply